In this article you will find the specifications of several barcode scanners. The offer now includes 1 static reader and 1 suitable for manual scanning of products.
Subsequently, you will learn what needs to be set up in the Storyous administration so that you can use the reader to the fullest.
BAR CODE SCANNERS:
Virtuos wireless bar code scanner
This is the newest handheld LED scanner in our range. The scanner scans 1D and 2D barcodes. The advantage of the scanner is that it can read barcodes from various surfaces and from transparent packaging or displays. You can connect it to your tablet via USB or Bluetooth. The package also includes a practical charging base.
Specifications:
Scanner: 68 (W) x 163 (H) x 80 (D)
Charging base: 73 (W) x 35 (H) x 92 (D)
Light source: LED light + red light for aiming
Interface: Bluetooth or USB base
Resolution: 3 million pixels
Scanning speed: 60x/sec
Battery life: Replaceable rechargeable Li-ion battery 2,200 mAh
Charging options: In the cradle or using a micro USB connector
Range: wireless 2.4 GHz up to 150 m (directly with the base), Bluetooth approx. up to 10 m.
Bar code scanner settings:
You can find the programming manual for advanced settings HERE.
SUNMI BLINK
Sunmi Blink is a barcode scanner with a unique design. The aluminum frame helps to read the code without any problems. It is connected to the tablet via a USB cable and offers a high-quality product scanning option without having to lift the scanner. The scanner constantly scans the space in front of it and can save a lot of time.
Specifications:
- Scanning angle: 45°
- Design: aluminium/colour: orange
- Dimensions: 97x90x100 mm
- Scanning: 30FPS, QR code (1D), Code 128 (2D)
- Interface: USB
How to work with the bluetooth bar code scanner in the web administration and with the cash register
To link the products and their codes, it is necessary to write the EAN code in the detail of each product that you want to scan and sell.
In the companies section, products tab, you can find the products you want to scan and open the product detail using a pencil in the last column. Overwrites the code from the product into the EAN field. It is now possible to scan products at the checkout. (All changes made in the administration will be reflected in the checkout after logging out.)
In the Storyous web administration, you will use the barcode scanner mainly when creating or editing stock cards and products. Click the mouse in the box marked EAN and then scan the specific barcode with the device. The changes made need to be saved so that they are also written into the application on your tablet, you need to log out and log in again.
When you use a barcode scanner to mark goods in the Storyous POS application on a tablet, after scanning the code, the goods are ordered either to an already open account or a new one is created.
NFC/RFID scanner for card login to Storyous POS
Logging into the application can be even easier and faster than before using an NFC/RFID card. A scanner for these cards that you simply connect to your cash register with a USB cable (it is therefore only possible to connect this reader to a 14" or 15" cash register). We will deliver the login cards together with the scanner.
BAR CODE SCANNERS WE NO LONGER SELL:
YOU MAY STILL BE USING THE DEVICE. Instructions for using the bar code scanner can be found below under the images.
Yumite YT-892 and instructions on how to properly handle the device. It is a laser bar code scanner connected to a tablet using Bluetooth technology, so operating the device is very simple - it is not necessary to install drivers, just pair it with your tablet and you can start scanning.
We prepared the possbility to use bar code scanner to sell faster. Pair the scanner with tablet via bluetooth, fill EAN codes and you can sell as fast as you need.
1. Pairing the scanner with tablet
Press the button on the scanner and the voice signal tells you that the scanner is switched on.
Scan the first code. When the blue light is winking it means that the scanner is ready to be paired.
Code 1.
In tablet open Settings and choose Bluetooth. Search for available devices and click on Bluetooth (the name of the device - scanner) and then scan code 2.
Code 2.
The scanner beeps as a signal that it s paired with the tablet.
2. Regime of scanning
In the basic mode the scanner scans EAN codes after pressing the button. If you want to set the constant scanning (EAN is scanned automatically) scan following code. 
3. Reset
To reset the device scan following code. The settings will be reset , but the scanner will stay paired with the tablet.
4. Swithing off and charging
The scanner will be switched off by long press of the button (10 sec.)
When charning there is red light winking on the scanner. When the scanner is fully charged the red light goes out .
5. Sleeping regime
The scanner is set to be switched off automatically after 2,5 min. of inaction. If you want to change the sleeping time, scan following codes:
- The first one for changing the setting.
- And the seccond one to set the time to 10 min.
To rewoke the scaner use the only button on the scanner.
5. Connection with PC
If you want to put EAN codes into Storyous web administration via scanner, you need to pair it with PC via bluetooth. Follow the point 1 abowe and scan those two codes.
Then open section Podniky - Produkty in Storyous web administration and in the detail of the product click into the field for EAN code and scan the code.
To see changes in tablet log out and in to the Storyous POS application. In POS aplication in tablet make the order using the scanner - scan the code and the product will be added to NEW ORDER.
Note. When charging the scanner, the lazer is deactivated after 10-15 sec. To activate it again press the button on the scanner. The scanner can work approximately 4-5 hours after charging.
Maxxo SL2DBS 1D&2D&QR laser scanner
This is the latest laser handheld scanner in our range. It offers support for most codes from EAN to QR. It can be connected to the tablet either with a USB cable or using bluetooth technology. Controlling and installing the reader is very simple. This scanner also easily reads smartphone LCD displays. A practical stand is included in the scanner package.
Specifications:
- Dimensions: 165 x 72 x 100 mm
- 1D&2D&QR laser scanner
- Bluetooth and USB interfaces
- Bluetooth adapter included in the package
- 30 million pixel resolution
- Scanning speed 200x/sec
BARC CODE SCANNER SETUP
When pairing the scanner with the tablet for the first time, it is necessary to charge the scanner. You can then connect the scanner either via Bluetooth or via USB. In any case, we recommend pairing the scanner so that it can be disconnected at any time.
In the Bluetooth tab in the tablet settings, find the Search for new device/Pair new device button and you will search. The name will be similar to the word "Bluetooth00". Then just click on the given scanner and the scanner is paired. If it doesn't appear, just resume scanning via the three dots in the upper right corner.
It may happen that the scanner still does not appear among the available devices. At this moment, it is necessary to follow the manufacturer's instructions that were included in the scanner's package. To pair, read the first code (1) - Bluetooth HID, wait 2 seconds and then scan the second code - Matching mode. The scanner should appear. You connect it to the tablet by clicking on the name of the scanner.
Any other scanner settings:
If you want the reader to light up constantly, scan code #3.
If you want the scanner to stay on until you click the activation button, scan code #4.
If you want the scanner to light up only when pressed, scan code #5.
Scan code #6 to reset settings.
Maxxo SL1DBS laser scanner
This is a basic 1D laser scanner with a USB interface or bluetooth technology. The package also includes a practical stand. It offers a scanning speed of 200x/sec.
BAR CODE SCANNER SETUP
When pairing the scanner with the tablet for the first time, it is necessary to charge the scanner. You can then connect the scanner either via Bluetooth or via USB. In any case, we recommend pairing the scanner so that it can be disconnected at any time.
In the Bluetooth tab in the tablet settings, find the Search for new device/Pair new device button and you will search. The name will be similar to the word "BluetoothScanner". Then just click on the given scanner and the scanner is paired. If it doesn't appear, just resume scanning via the three dots in the upper right corner.
It may happen that the scanner still does not appear among the available devices. At this moment, it is necessary to follow the manufacturer's instructions that were included in the scanner's packaging. To pair, read the first code (1) - Bluetooth HID, wait 2 seconds and then scan the second code. The reader should appear. You connect it to the tablet by clicking on the name of the scanner.
Any other reader settings:
Scan code #3 and then #4 to reset settings.